You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Lolly

Starting Member

1

Friday, July 22nd 2011, 11:50am

Hunter System will work on manual but not on program

What am I doing wrong read manual and followed all steps

Mitchgo

Supreme Member

Posts: 502

Location: Seattle

2

Friday, July 22nd 2011, 12:54pm

Read them again?

Stick with 1 program ( A) , 1 start time, Days you want to water, and zone run times on all the zones you have

Matt Dildy

Senior Member

Posts: 17

Location: Fort Worth TX

3

Tuesday, July 26th 2011, 2:08pm

to add to what mitchgo said i would program a "mock" start time to double check controller function before walking away and assuming all is well

example:

set program A start time #2 for a start just a few minutes from whatever time the controller has (so if its 12:45pm set a start at 1:00pm). make sure whatever day it is you have turned that day on. now sit back and wait, at 1:00pm zone #1 should kick on. turn controller off before it cycles all the way though, we just wanted to see it start. dont forget to erase that "mock" start time.



99% percent of the time these programmed "non-starts" are a programing error of one sort or another, typically if a controller will manual correctly it will run in automatic correctly, with a few exceptions.

Rate this thread