You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

John Wig

Unregistered

11

Wednesday, May 4th 2011, 7:53pm

Thanks Boots, but....

You kind of lost me on the last one. Set to AC...connect to the controller common and to the system common...what do I look for there??........Also....the zone in question (which is actually 2 valves because two wires are connected to that zone) it worked today....????

Wet_Boots

Supreme Member

Posts: 4,064

Location: Metro NYC

12

Wednesday, May 4th 2011, 8:06pm

AC current readings are kind of advanced, and a lot of multimeters don't even have AC current as an option. If the system works 100 percent, there's nothing for you to find. If a zone with a 20-ohm solenoid trips the 'breaker' you measure its resistance, and look to see a reading of at least 20 ohms. A lower reading would indicate a short. A zone with two valves would be more likely to be an overload.

rockstar

Starting Member

13

Sunday, June 12th 2011, 11:44am

battery

trying to figure out why my battery only last about a day or two then i have to replace anyone have any ideas on what's going on ?(

Rate this thread