You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

barryb

Starting Member

1

Saturday, June 11th 2011, 12:15pm

Pressure reducer squeal

The pressure reducer, (20 PSI for drip) is the source of the noise, a high pitched squeal. There is a small diameter (1/16th inch) hole designed into pressure transducer. With water pressure present, when I put my finger over hole, it takes about 10 seconds and squeal stops. I then remove finger and a little spit of water jets out and squeal starts again. Sometimes, there is a stream of water coming out of this hole as soon as valve above opens and pressurizes line.
What is going on?
Just replace the pressure reducer?
Thanks, Barry

Wet_Boots

Supreme Member

Posts: 4,054

Location: Metro NYC

2

Saturday, June 11th 2011, 12:17pm

They're cheap - get another one

Rate this thread