You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

2Quik

Senior Member

1

Saturday, May 28th 2011, 12:42pm

installation and location of filter

where is the best location for the filter? Can i put my filter at the beginning of my main, then shutoff valve, then quick coupler. Then from there go 75 ft to my manifold valves? Or does the filter have to next to the valves?
1.Main shutoff valve for the whole system
2.filter
3.shutoff valve
4. Quick coupler
5.manifold valves

HooKooDooKu

Supreme Member

2

Saturday, May 28th 2011, 10:49pm

I don't see any reason to winterize THRU the filter, so I would place it in the order that you show. However, I would add either a backflow preventer between the filter and quick-connect (if the system connects to any potable water source before the main shutoff) or anonther shutoff valve (if this is a well system dedicated to irrigation) just so you are not applying the heat from a compressor to the filter's rubber elements, and you can close off the system if you ever have to remove/clean the filter.

2Quik

Senior Member

3

Saturday, May 28th 2011, 11:11pm

There would be a shutoff valve after the filter so i wouldnt be winterizing through the filter.

Where can i place my filter? @the beginning main valve or 75' at my main valvr?

Wet_Boots

Supreme Member

Posts: 4,088

Location: Metro NYC

4

Sunday, May 29th 2011, 6:35pm

Filter location is not a big deal - pick anywhere.

2Quik

Senior Member

5

Tuesday, May 31st 2011, 11:13am

Thanks you guys have been very helpful, thank goodness for this forum!

Similar threads

Rate this thread