You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

golfroo

Starting Member

1

Saturday, May 14th 2011, 10:36am

Dog ate my valve

I have a irrigation system with the valves buried in the ground. I have a new puppy that dug up the box an ate the wiring from the valve. Before he did this, the sprinkler worked fine. I replaced the valve, but do not know how to connect it.
I have two wires from the valve, a black wire in the ground that is not connect to anything, two white wires that are connected to each other, and a 7 strand wire that run thru the area but does not connect to anything. When I turn on the sprinkler, zone 1 starts but only a sprinkler head, and its very low amount of water. I checked the water pressure and its fine. I think its a wiring issue, but not sure how to wire it. I connect 1 wire from the valve to the white wires and 1 wire from the valve to the black wire. No luck.
Any thoughts?

mrfixit

Moderator

Posts: 1,460

Location: USA

2

Sunday, May 15th 2011, 2:01am

Maybe one of the wires is a spare. Could be white white. Black white or black and the other white.

The way you hooked it up made total sense but it's not working so try the other ways.

Similar threads

Rate this thread