You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

SStbdriver

Starting Member

1

Sunday, April 10th 2011, 8:52am

Moved into a home with a non-working Rainbird System

Recently purchased a home that had a Rain Bird System previously installed but it is inoperative. The controller seems to function but beyond that no other results, e.g., no water at any heads, etc. Any suggestions on how to locate the various components that make up a system?

hi.todd

Supreme Member

Posts: 413

Location: Houston, Texas

2

Sunday, April 10th 2011, 1:18pm

I have a couple simple ideas that are usually the cause. Check the backflow device and make sure the handles are inline with the pipe that each of the 2 handles are mounted on.

Check for a rainsensor, After you have checked for the rainsensor, if the cable is cut from the controller (or point of connection to the wire to the rainsensor, the system will be dead.

Of course, if these ideas don't get you started find the water tie in usually close the water meter and see if the isolation valve is closed.

Good Luck

:thumbup: :thumbup: :thumbup: :thumbup:
:thumbup: :thumbsup:

Rate this thread