You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

drsoma

New Member

1

Sunday, October 3rd 2010, 9:25pm

Toro TR50 Hi-Pop Severe Leak

I installed two Toro TR50 Hi-Pop heads (same zone) to replace a standard TR50s so that I could spray over nearby plants. Both spouted water around the pop-up shaft, spraying very little. Nice fountains, but not exactly what I had in mind. I have had no response from either my installer from who I bought the heads (I did the replacement - a simple exchange of TR50 rotor heads), and nothing at all from Toro. Nice service.

Can you help me understand the problem? Or are these rotors perhaps defective? I had to pull them immediately and return to the standard rotors.

Central Irrigation

Supreme Member

Posts: 364

Location: Central Minnesota

2

Monday, October 4th 2010, 8:41pm

The heads are either missing their wiper seals, or the cap that holds the head together is loose.

Wet_Boots

Supreme Member

Posts: 4,082

Location: Metro NYC

3

Tuesday, October 5th 2010, 10:21am

Water pressure may be the issue. Pressure sufficient to pop up a standard head may not be enough for a hi-pop head. The zone may need to be re-nozzled, to bring up the pressure.

drsoma

New Member

4

Wednesday, October 6th 2010, 11:57am

Toro TR50 Hi-Pop Sever Leak

Thanks for both of your replies. I will check my units for the wiper issue, and will talk to my installer about pressure. I have a work-around in place now that satisfies my needs. Both units were to serve a vegetable garden, and I intend to replace the two with a drip system next spring. I do have a couple of other places where those hi-pop units would be useful, so solving the leakage problem would be most beneficial. I sure wish that I'd known of this forum a year ago. Again, many thanks.

Rate this thread