You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Daryl1983

Unregistered

1

Thursday, August 5th 2010, 12:30pm

sprinkler system not working

System has pressure. When opened up water pressure depletes rapidly. No zones even have the heads pop up. There is a hose bib on the main valve of sprinkler system and that puts out water, but not at a good rate. I have had 2 repairmen to look at it and they are stumped. Could the well not be regenerating? Could there be a leak under ground between zones/valve boxes? When the valve inside the house is shut off, we have never had any loss of pressure, or water. When the system was operating we could only run it for 45 minutes because the pressure would be depleted. According to the well guy, the system showed 12gal/min and should regenerate at 40 psi. It normally is around 50-55. Help!

Wet_Boots

Supreme Member

Posts: 4,082

Location: Metro NYC

2

Saturday, August 7th 2010, 9:40am

Ask the well guy what the steady-state performance is. A well that regenerates slowly (this refill-rate is a number you should know) may have to operate for a while, then rest for awhile.

Similar threads

Rate this thread