You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

1

Sunday, June 27th 2010, 4:20pm

Relacing old valve (2 wire) with new valve that has 3

I am replacing one of my old Orbit valve with a newer model that has 3 wires. On the advise of a home depot guy, I cut the connector off the new valve and wired 2 of the 3 braided wires to my existing wiring system. I left the green wire dangling. This of course blew the fuse. Does anyone know if this can be done and how?

mrfixit

Moderator

Posts: 1,419

Location: USA

2

Sunday, June 27th 2010, 6:10pm

Do you mean you've replaced the controller?

3

Sunday, June 27th 2010, 11:31pm

not sure what you mean by controller. It's the valve I replaced Orbit model 91035. Instead of having two wires from the valve to connect to my timer, it had an male jack, when cut there were 3 wires.

mrfixit

Moderator

Posts: 1,419

Location: USA

4

Monday, June 28th 2010, 3:42am

I wont be able to help you with this valve.

www.orbitonline.com/products/Timers/01/04/04/236/

Similar threads

Rate this thread