You are not logged in.

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

1

Thursday, June 17th 2010, 8:12am

manifold system

Just had the system installed and was working fine. Two days later all the valves came on at once. Turned everything off and the pump kept running and the sprinklers stayed up. I have three zones and thirteen heads, 5, 4, and 4. the well pump is 1hp. the only way to stop them was by turning off the pump. Thanks, marty

Wet_Boots

Supreme Member

Posts: 4,072

Location: Metro NYC

2

Friday, June 18th 2010, 8:32am

On pump-fed sprinkler systems, the valves should have flow controls for you to turn down for more reliable operation.

hi.todd

Supreme Member

Posts: 417

Location: Houston, Texas

3

Friday, June 18th 2010, 10:34pm

If you don't have filtration on the pump, you will get trash in the valves and they will stick open. I like to use the scrubber or self cleaning valves on wells and pumps. You may check the filtration. You will probably need to open a valve up and look at it to see if there is trash in it.

Good Luck :thumbsup: :thumbsup: :thumbsup: :thumbsup:
:thumbup: :thumbsup:

Rate this thread