You are not logged in.

Search results

Search results 1-6 of 6.

Tuesday, July 17th 2012, 1:51am

Author: jedisme

Minimum GPM?

I redid the bucket test after finding a fitting I did not snug up very well and instead of using a waterhose I went straight from the spigot. I got better numbers 13.6 GPM. .

Sunday, July 15th 2012, 1:39am

Author: jedisme

Minimum GPM?

I do not have a presure switch ..pump start relayed.

Saturday, July 14th 2012, 3:39pm

Author: jedisme

Minimum GPM?

I recently did a GPM test (bucket test) and only got 9.7 GPM seem low? This is from a well and a new pump, I filled the bucket with a water hose coming from the pump (if it matters). PSI was 45-50.

Monday, July 9th 2012, 12:07am

Author: jedisme

Valve manifold question

How might making a manifold out of 1 1/2 inch pvc pipe T's or crosses with a reducing bushing to the valves affect performance? I had a few given to me years back was curious to know.

Monday, July 2nd 2012, 12:13am

Author: jedisme

GPM question..

I installed a new well pump (Goulds 1.5 HP Irrigator), I am in the begining process of installing an irrigation system. How do I determine the GPM from a well? Any help is appreciated!

Sunday, May 27th 2012, 12:45am

Author: jedisme

Demming Crane old pump stupor!

Well, I have been a lurcker her for quite sometime and now have decided to join the gang here. I'll get right to it, I bought this old pump awhile ago the pump runs great no issues there I get a good PSI (60-65) and GPM (14) hold a prime fairly well it will lose a prime if I leave a valve open. My question is, anyway the 1' inlet is restricting my GPM? I've tried to find more information on this pump and have had little success I am not sure of the HP or can I find a model number I took a few pi...