You are not logged in.

Search results

Search results 1-4 of 4.

Sunday, August 19th 2018, 12:33pm

Author: SprinklerNut

Micro sprinklers, drip emitters - brands?

Being in the business, I’ve ran out of Rain Bird while on my route. And I use my house as a testing ground for a variety of products. I can tell you that the Mister Landscape Drip Line (real flexible stuff) will pop off fairly easy when it gets hot. The Micro Emitters from Dig, as well as the manifold they provide are junk. I only use the full circle (not steam full circle) Rain Bird Micro Emitters after trying our nearly all the various brands. And to answer your question about drip line. IMO N...

Sunday, August 19th 2018, 12:27pm

Author: SprinklerNut

Does the spigot/hose bib need to be below the backflow preventer? See pictures in my post

By code (at least where I am at), the spigot needs to be AFTER the PVB. So it would need to go on the downleg.

Monday, August 13th 2018, 12:02pm

Author: SprinklerNut

Toro TMC 212 Controller Mv error message

Years ago when we used those controllers at a company I worked for, we had that issue often. But ONLY for a pump start relay or older master valve. The TMC 212 had issues providing enough juice to the valve (I.e. Zone #1) AND the PSR or MV. Do you have either on your system?

Wednesday, August 1st 2018, 12:51pm

Author: SprinklerNut

Hunter Pro C Reprograms itself

Quoted from "Pop's" Hey guys this is my first post and I really appreciate any help y'all can provide. :-) I have a Hunter Pro C controller that was installed in 2005 with 15 zones. It has worked well and has never been a problem. Just recently it has started "Programming Itself." By that I mean it randomly waters a single station at any time and duration it wants to. When I immediately check the program I find it has been modified. I have even done the "System Reset" and reprogrammed the unit,...