You are not logged in.

Search results

Search results 1-5 of 5.

Thursday, June 7th 2018, 3:29pm

Author: Uboat

Hunter ICC 800 random random operation

I think changing the channel on the remote may be the answer. I unplugged it a few days ago and no issues since. Thanks for the suggestion.

Saturday, June 2nd 2018, 8:34am

Author: Uboat

Hunter ICC 800 random random operation

Great questions. The controller shares a power strip with a dog radio fence (constant circuit) but nothing else on that power circuit. I do have a remote as I have 23 zones - I will disconnect that for a few days to see if that makes a difference. Hunter Support got back to me and said I need to replace the controller face - shocking... Thanks again for your help.

Friday, June 1st 2018, 8:29am

Author: Uboat

Hunter ICC 800 random random operation

I did a full reset and then reprogrammed. I've double checked the programming, now with the full understanding of D & "USED". This morning, with the battery out and unit unplugged, I unplugged each of the components and replugged them, in the event something was not connecting. Thoughts? Thanks very much for helping me troubleshoot.

Thursday, May 31st 2018, 8:24pm

Author: Uboat

Random operation - Hunter ICC 800

Okay, got it. Thanks very much for straightening me out. Now it makes sense. Back to the main issue - random operation. I originally reset this controller because it runs randomly - unprogrammed times for much longer than I would ever program any zone. Any suggestions? Do I need to replace one of the modules? How do I know which one? Many thanks.

Tuesday, May 29th 2018, 9:17am

Author: Uboat

Hunter ICC 800 random random operation

I recently did a full factory reset my Hunter ICC 800 Controller because it was turning on randomly - odd stuff. I was able to reprogram all but "Program D", which as I recall was previously reserved to control the master valve. Before the reset, D1-24 all said "USED", but now D1 is open for programming and I think this is what is causing the problems. How do I program D1 to be used exclusively by the master valve and lock it to "USED" again? I've searched the manual and the web but have come up...