You are not logged in.

Search results

Search results 1-3 of 3.

Monday, May 20th 2013, 8:04am

Author: dorins

Replaced old controller, now one zone does not work

Understood, thank you mrfixit! Even if I don't re-associate the original zones back to how they were they should still be operating individually, I think?

Monday, May 20th 2013, 7:10am

Author: dorins

Replaced old controller, now one zone does not work

Thank you, fixit, I will try and see what happens. Btw, I noticed for the front yard (where one zone isn't working anymore), there are 4 valves in the box, one for each zone, but at the controller two wires (not the common) were attached to the same zone control... is there a reason why I would want to open and shut two valves simultaneously rather than separately?

Sunday, May 19th 2013, 8:36pm

Author: dorins

Replaced old controller, now one zone does not work

I replaced an old (antique) controller with a Orbit 6 w/remote. I marked each wire and installed them in the new unit. All the zones operate (at least in manual mode using the remote) except one. I even reinstalled the old controller and the zone is still dead. Could I have shorted a circuit, valve etc when I removed the old wires? Any suggestions?>