You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5195 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, October 31st 2004, 1:20pm

by nestors

Spray some wd-40 on the neck og the heads then tap them down , then run it and see what happens if some still stay up spray again.

Nestor's Sprinklers

Georgia Contractor
24 years in Business

Friday, August 20th 2004, 10:28am

by billingsleyj

The most likely cause of your problem is sand in teh gasket that surrounds the shaft. While teh system is running you can actuate the head by pushing down on it with your foot several times. Be careful to push straight down. This should flush out the sand. Toro sprinkler are just as good as the others.

Friday, August 13th 2004, 4:27am

by nazabe

Thanks. I think the brands you recommend are better. I had Rainbird before and it never gave me this problem. I inherit the Toro from the previous owner of the house which I just bought recently.

Friday, August 13th 2004, 3:37am

by aquamatic

If they are fairly new within warranty I would have Toro replace them, If they are not , do not replace with Toro. Rainbird or Hunter sprays!

Thursday, August 12th 2004, 10:52am

by nazabe

Sprinkler heads won't retract

Some pop-up sprinkler heads stuck and stay exposed after watering. Need to push them back down. They are TORO 570 Series, 3 inches. Do I need new heads or retracting springs, or can I just lubricate them?