You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5320 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, July 26th 2004, 5:42am

by bobw

I'd bet that you've gotten some dirt into the valve and that is why it is sticking open. So... turn off the water supply and open up the valve. Remove the rubber diaphram and look for dirt/pepples/etc. Remove anything you find and close up the valve. Make sure that the solenoid is closed (should be a black cylinder looking thing on top of the valve).

Sunday, July 25th 2004, 9:11am

by Prisca

area valve does not shut off

one of our area valves leaked at the connection to the pvc pipe, so we replaced the pipe and the leak is fine. but now we can't shut off that area valve.
we have a battery operated system and i already tried to reprogram the computer, but the valve does not shut off. what and where is the problem???????