You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3809 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Tuesday, June 15th 2004, 6:29pm

by radical

I recommend the Rainbird R-50 Rotor with Raincurtain Nozzle or the Rainbird 5000 Rotor.

Wednesday, June 9th 2004, 2:40pm

by RVLI

I would replace it with a Hunter PGP or Rainbird 5000 series, or if you have 1/2" outlets, Rainbird 3500 series or the NEW Hunter PGJ

Saturday, May 15th 2004, 4:12pm

by Squidward

Can you give me more details about changing over from the impact-type Rainbirds to rotors. I've been in this house 3 years and know the system has numerous non-working heads along with some tilted heads. I also have to replace about 80' of hose and 5 heads that were dug up for utility work. I may be replacing a valve attached to the vacuum breaker.

The sprinklers are apparently all Rain Bird Model No. 15103.

I'm wondering what would make the best substitute, particularly in terms of ease of replacement and economy. Please use specific brand and model or part numbers. There are so many different styles, and the terminology is kind of confusing. I have 5 zones and about 24 heads total to replace. Many thanks.

-Squidward

Friday, April 30th 2004, 7:28pm

by RVLI

Maxi-Paw's should work. Better yet I'd suggest that you convert all your impact heads to newer rotors.

Friday, April 30th 2004, 4:58pm

by mike d.

Rainbird Pop-a-way relacement

I have a couple of broken Pop-a-way rainbirds that need replacing. I've been at this residence only a couple of years, so don't know the sprinker system histery. I've gathered (but not sure) that pop-a-way rotors are no longer available... Is the Maxi-Paw an acceptable substitute? I'm assume I'll find common PSI / range specs between the two. What about replcement covers?

Thanks for the help!!

Mike