You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3320 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, April 20th 2004, 10:34am

by mugentuner

The 1 1/4" piping is connected to a foot valve that goes down around 18' into the well. The 1 1/4" connections to the pump itself are about 4' total-so I would say 22'coming from the bottom of the well to where I would like to run the 1" piping from. I haven't measured my gpm as of yet because my plumber is still completing the install on the pump itself, but it's a 1 1/2 hp pump that is supposed to be pushing descent gpm when it's all done and said. So, 1" pipe will be suffice?

Tuesday, April 20th 2004, 3:59am

by aquamatic

What is your GPM and longest run length?

Monday, April 19th 2004, 6:34pm

by RVLI

How long is the 1 1/4" Line?

Monday, April 19th 2004, 6:22pm

by mugentuner

Pipe size coming from pump to heads...

my pipe size coming off my pump is 1 1/4" pvc and I was planning to go with 1" piping to the heads and using 3/4 risers. Would this be good for flow? Any help appreciated. Thanks