You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5180 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, April 18th 2004, 4:50pm

by m7317

That is what I thought too, i just ran a 1" copper water line from my meter to the out side. (installed a shut off vavle and an inline hose bib connecter to drain the water out of the line in the winter. Is a hose bib the most common type of blow out connecter?!?

Friday, April 16th 2004, 6:46pm

by HooKooDooKu

I seem to recall being told once that it's against the standard plumbing code to install a connection point before the backflow because you could "push" stuff back into your house plumbing. I think the basic idea is that you don't include anything before the backflow so as to prevent some idiot who doesn't know how the system is set up from doing something stupid that allows "stuff" into the potable water supply.

Friday, April 16th 2004, 1:32pm

by m7317

Blow - Out System

Is it ok to blowout a system through the backflow, or is it better to do it after?!? What is the most common blowout attachment on a system?!? Thanks.