You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4517 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, March 18th 2002, 4:08pm

by SprinklerWarehouse Irriga

We only sell the complete valves and not parts since it is better to buy the valve and take the top off the new valve and replace the old valve top. Plus a new valve is cheaper than if you buy the parts separately. This way you will end up with a new diaphram, solenoid, and internal filters. You will have a new valve since the bottom body piece is only a PVC base and does not go bad. The trick is you must use the exact model valve as the old valve. If you can not find the same valve (if yours is so old that we do not have it online) then we suggest you replace the entire valve.

Here is the link to the HPV valves on our website:
http://www.sprinklerwarehouse.com/shop3/ValvesHunter.html
<img src=icon_smile.gif border=0 align=middle>


Monday, March 18th 2002, 4:05pm

by Mombo

Solenoid replacement or the top of the valve?

I need a solenoid for a hunter hpv 1 inch valve. Do you sell just parts for a valve such as solenoids or diaphrams?