You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5172 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, March 23rd 2004, 1:26pm


With any head you get for a dirty water application, go with a stainless steel. You will not regret it.

Saturday, March 20th 2004, 12:57pm

by Eric Young

Dirty water

I plan to expand my large residential system to cover 2.5 acres. My irregation ditch water is very dirty. In the past I have had lots of problems with heads clogging. Currently I have a 50 mesh filter before my pump with a 150 mesh and sand separator after the pump. This has greatly reduced my clogging problems. Any suggestions regarding best valves and rotors? I will be using 1.5 or 2" valves.