You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2136 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, July 16th 2013, 2:06pm

by mrfixit

If it's pvc look for a clog at the last working sprinkler. The tee might be clogged on the outgoing port.
If you can't find a clog there then try running water backwards down the line. Attach the hose to one of the fittings where the non working sprinkler is. Maybe even cut the pipe and attach the hose there. You might have to ram something down the pipe to loosen the clog once you find it.

If it's poly pipe then it's probably pinched off somewhere.

Are you certain that all the sprinklers are connected to just 1 valve? Maybe two valves are wired together and one isn't working.

Tuesday, July 16th 2013, 1:42pm

by donedigging (Guest)

Half of a zone wont turn on

Help! Half of our zone 3 (grass area in the back yard) wont turn on. We have tried looking for wet spots and leaks and have dug up all remaining sprinklers on the lines back to the last working sprinkler head....and no leaks or cracks what? Any advice would be appreciated!