You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3767 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Tuesday, March 30th 2004, 8:27am

by drpete3

Any on line sources for purchasing that you would recomend?

Tuesday, March 30th 2004, 2:46am

by waterpilot

Thanks for the tips.

Monday, March 29th 2004, 1:23pm

by mrwettech

I'm not going to put down any product. "You get what you pay for" is very true in most cases and I'll just leave it that. I can say that I have serviced the Malibu line and my service fee was alot more than the product I was servicing. Use 8 gauge 2 strand wire for your main runs. Branch off with 14 gauge for single lights and 12 gauge for 2 to 3 lights. Keep in mind that with a 300 watt transformer you can get 8 to 9 30 watt lights on the circuit. The lower the wattage demand the more lights per circuit. Just about the same principles as irrigation systems. You will have wattage loss on longer runs. No need to worry about corrosion as long as you use sealed wire connectors. Just leave room between your irrigation and lighting wire. Also, try to off-set them in the trench. Irrigation off to one side of the trench. Lighting to the other. Your lighting wire doesn't need to be to deep but, deep enough so you won't be concerned when you aerate your lawn. Hope that helps.

Monday, March 29th 2004, 3:32am

by waterpilot

Is the Malibu Metal line that's available through Lowes and Home Depot, crap? I'm putting in an irrigation system and I plan on using the same trenches to wire for the low volt lighting. Should I be concerned with corrosion doing it this way? What guage wire would you recommend - some runs could be 150 from the transformer?

Thursday, March 25th 2004, 12:58pm

by mrwettech

Vista has a pretty good line of professional lighting.

Saturday, March 13th 2004, 4:31am

by drpete3

Lighting

Hey nestors. What type(brands) of low voltage lighting do you use?