You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 374 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, April 9th 2013, 11:21pm

by electrifiedmale

Im not an expert in the sprinkler field, but your question is basic one.

Your mainline and lateral size will depend on the Final Deisgn. The deisgn includes how much pressure
(both static and dynamic) you have, how much losses you have and how much GPM each zone will require
etc. So there is no answer to the question until the design is known. As a sort of rule of thumb, your main will be at least the same as your main line from the water supply. However there are exceptions to that rule.

I highly recommend you read and then read again the irrigation tutorial. Everything you could possibly need to know and learn to design and install your own system in a normal lawn is there.

http://www.irrigationtutorials.com/sprinkler00.htm

(you will prolly have to copy/ paste this link into your browser to make it work). This is not a boring read either. The guy wrote it in a manner which is both entertaining and understandable by a novice like me.

I designed and installed my own system solely by studying the irrigation tutorial over and over until I understood what I was doing so that I was sure I was doing it right.

As a FYI, if you did the bucket test and came up with the 7 gpm from the hose bib, then most likely that is wrong. Same thing happened to me... I retested once I tapped into my 1 inch main and lo and behold, I have 18 GPM available instead of 7 or 8 that came out of the bib.

By the way, I just finished my sprinkler system this past weekend and my sprinkler system works wonderfully. I could not be happier and my neighbors are impressed too. 8) I could not have done it though without the tutorial by Mr. Stryker. He Rocks!

hope this helps, and good luck.

Tuesday, April 9th 2013, 9:48am

by Atkin75 (Guest)

Main Line Diameter

Hello all,

This summer I will be installing an irrigation system my self. I have been purchasing parts this past winter and I am now ready to buy the pipe for the main line, problem is, I'm having difficulty figuring out what diameter to use.

I have municiple water, a 1" copper service line and a 1" meter; the system holds between 47-50 psi and produces about 8 gpm. There will be 7 zones and 42 total sprinkler heads. I live in southeast Michigan so I will be using poly pipe since ground freezing is inevitable.

Any help of advice regarding diameter will be helpful. Thanks in advance.