You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1918 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, March 18th 2013, 2:25pm

by Wet_Boots

You need to put your water supply into numbers, so you can rule out a mismatch with an indexing valve. "Seems to have good pressure" is not really useful as data.

Have you opened up the non-working valve and made sure it was not jammed, and that everything moved freely?

Monday, March 18th 2013, 1:42pm

by Darnpilot (Guest)

Indexing valve

I've tried multiple 6-zone indexing valves (multiple valves and different brands too) on the north half of a split 12-zone system (2 x 6-zone indexing valves). I'm using indexing valves because I have 2- water cooled heat pumps in my house, and I use the discharge water to sprinkle my lawn.
The north 6-zone valve will not index, in fact it seems to be stuck between zones and just kinda pees out all the heads.
I seem to have good pressure and none of the zomes are overloaded.
Any ideas?