You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2229 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, January 9th 2013, 11:08am

by Wet_Boots

Obviously, someone qualified for the job should be checking out the entire setup.

Wednesday, January 9th 2013, 6:46am

by Terri

"Fault Light" on pressure controller

Hi from Cape Town,

My borehole has a submersible pump with with inline pressure reducing valve, filter, and pressure controller then onto irrigation valve manifold. The problem began with water seeping (slow drip) out of the pressure controller which is indicative of a leaking diaphram. Before I could replace the controller the pump stopped running and a fault light illuminated on the pressure controller. I suppose that the leaking water out of the controller resulted in a drop of pressure resulting in the pump switching off.
I have now replaced the pressure controller but i see that the fault light is illuminated on the new unit as well. I opened a valve which should should start the pump but the pump remains off.
Does the system need to be primed after replacing the pressure controller?
What is my next move in trouble shooting? (Checking capacitor?)
I am afraid of damaging the submersible pump.
Terry ?(