You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2078 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, October 12th 2012, 4:40pm

by Wet_Boots

Now you get your multimeter and check to see if any voltage is present in the controller.

Friday, October 12th 2012, 12:35pm

by justjan

yes, the outlet where the box is plugged in is getting power. Other things work when plugged in.

Wednesday, October 10th 2012, 12:58pm

by Wet_Boots

You have ruled out a tripped GFCI device? The outlet the controller is plugged into does have power, right?

Wednesday, October 10th 2012, 11:22am

by justjan

no power in the sprinker box

I checked the box and nothing is working. No numbers show up in the display box. It is plugged in and I checked the wires and they all seem to be connected. Is there a fuse or something that could be out. What should I check or do.