You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2335 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, August 28th 2012, 2:11pm

by mrfixit

Turning the water off to the system and releasing the pressure out of the manifold will help you hear the solenoids.
If you need to rent a wire locator maybe rent a chatterbox while you're at it.

Tuesday, August 28th 2012, 12:23pm

by joe13

how to find buried control valves?

Have some buried valves that I need to find and have seen some discussion about using a piece of wire to jump and put power to the individual valves inside the controller box in order to cause the solinoid valve to make some noise. My question is from which terminal inside of a hunter pro-c do I jump of the yellow wires coming from the transformer??
Thanks and any other suggestions before I go and get a valve locator would be appreciated