You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2132 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, August 18th 2012, 3:53pm

by mrfixit

Just match up the colors of the wires and splice them back together.
Buy a length of wire at the Home Depot if need be. Count the wires. They'll cut you off a short piece if you ask them.
Be careful when you remove the outer casing off of the individual colored wires. You can crimp the copper and it'll break in half when you twist it together.

Saturday, August 18th 2012, 3:19pm

by cpearson (Guest)

repair sprinkler wiring chewed by puppy

?( How do I go about replacing wiring chewed by a puppy? The wiring is in a sleeve on the outside of my house which is directed to go to inside the garage and to the control panel. I have NO clue about how to do this and would like to try.

Thanks for your help!