You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2116 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, August 3rd 2012, 5:10pm

by Central Irrigation

Got me then! Is it only a 4 zone controller? If the controller is capable of running more zones, then switch the wire to a different zone terminal.

Thursday, August 2nd 2012, 8:26pm

by donwood

Thats the problem, I can't make the controller SHOW zone 4 any more. Except in manual mode.

Thursday, August 2nd 2012, 7:09pm

by Central Irrigation

Put a run time on zone 4 and remove the second start time from the program. Check all programs, since it maybe on a second program.

Thursday, August 2nd 2012, 6:27pm

by donwood

Nelson Controller doesn't "see" one of my zones

Have NELSON SmartZone EZ. Owned house 6 yrs, has worked perfect,4 zones. But lately controler doesn't list zone 4, nor does the zone come on. Checked inside, all 4 zone wires are connected. Also, not as concerned about but when sprinklers do work it runs the complete program (now only 3 zones) twice. Please help