You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, July 9th 2012, 2:55am

by Wet_Boots

find the bad zone valve solenoid and replace it

Sunday, July 8th 2012, 9:32pm

by Jeffsaflyer

Keeps blowing the 2A Fuse

Hello,

Well, I'm the new guy here and I'm glad I found this forum to ask about a problem. My Controller Model 1260i keeps the correct time & day, and cycles through the different Zones, but after a few hours, it blows the little 2A Fuse. After several incidents of replacing the fuse, I took the front cover off and noticed some very fine black powder right in the middle of the box underneath some of the gearing wheels. I am suspecting a motor getting too hot or a gear hanging up or something. Visually, everything looks fine with the gears and motors, so I am not sure what it going on.



Thanks for your thoughts!



Jeff