You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 753 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Monday, July 9th 2012, 1:20pm

by GatorGuy

See, that's were I'm oh-so-fortunate.
I have a fine crop of mosquitoes with no effort on my part.

Monday, July 9th 2012, 12:18pm

by Wet_Boots

Rain-barrel watering is done because you want it done, not because it is economical. And don't forget that rain barrels are swell places to grow mosquitoes.

Monday, July 9th 2012, 9:54am

by GatorGuy

Some of the things you ask will really add to the price.
" How to set it up so it uses up the water in the barrels first then lets me switch over to city water."
That's not going to be cheap. Or easy. You will have to have something to notice when the barrels are dry (float? flow sensor?) then something to switch from one feed line to another.
110 gallons divided by 55 beds = not much water unless you get lots of rain.
The next question is how high are the barrels?
If they are not high enough to provide pressure then you need to add a pump.

You might be better off just going straight with municipal water.

Friday, July 6th 2012, 11:55pm

by mrfixit

You'll never ever in a bazillion years water all that stuff with just 1/4 inch tubing.
With drip there's numerous ways of doing it.

I'm not a design guy I'm a repairman but I've installed numerous drip systems and repaired 100's.
If you want it to work and you want to see it working you'll need to run 1/2 inch tubing through out.
Now attach your 1/4 inch tubing to that.
Now attach these,
Bubblers
You can get stream bubblers, flood bubblers and even 360 degree sprays with these. All very cool.
They're totally adjustable.
You'll only be able to attach 3-4 max with 1/4 in tubing before you lose water pressure. I usually do 1 only. Sometimes 2, usually in a large pot.
The beauty about these is they're totally adjustable. You can move them around wherever you want.
The best part is you can SEE them doing their job.
Another thing is they put out enough water to ensure the valve operates correctly.
I've never had a home owner complain about these.
-----
That's one way of doing it.
----
There's more stuff you'll need, filter, pressure reducer maybe, but I've given you my 2 cents. I'm all ears on other ways of doing it.

Friday, July 6th 2012, 9:59pm

by Newfie (Guest)

Help me design this, cheaply, efficiently, but not junk.

Hi. Could use all the pro minds together on this one.
Been looking at automating the watering of the veg garden.
Heres what I have.
a 50 foot by 50 foot plot. Within that I have 55 raised beds. ranging from small to large.
Within the Greenhouse, I have 2 55 gallon drums for rain water collection, I also have city
water in the greenhouse and power.
On the outside perimeter of the garden, I have flower plantings. What I think I want is the





DIG ML-1006 1/4 in. Black Non-PC Black Micro Drip Line (1000 ft.)

I figure if I run a strand outside the 50'x50'perimeter, that would use 200 feet,same on the inside perimeter, leaving 600 feet for the various raised beds inside the perimeter..

The questions I have is, how to ensure there is enough pressure to have all the emitters work properly, to know what else to buy with the drip line to be able do all this with.. , How to set it up so it uses up the water in the barrels first then lets me switch over to city water.., how to reduce the pressure on the city water, any other considerations I haven't even though of... I'm new to all this, I've read all the product listings, and have a general idea but am completely overwhelmed with all the terminology, And I don't have months to learn it all. My garden is drying up in this heat and I can't hand water such a big area twice a day.... too much time.

So thats my sad little story, so can the smart ones help? (haha) Tell me what to do. What to order.
Appreciate your help.
Sue