You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2191 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Saturday, June 23rd 2012, 1:14am


Re: Rain Jet Zone Problem

Thanks for that. I'll try to get a picture of the valve up soon. This is getting a little over my head.

Saturday, June 23rd 2012, 12:27am

by mrfixit

The valve needs to be rebuilt or replaced depending on the model.. Do you know what it is or can you post a pic?

Saturday, June 23rd 2012, 12:04am


Re: Rain Jet Zone Problem

Thanks for the tip mrfixit. You were right that they were wired to one zone and I figured out how to separate them, but the low pressure to one half of the yard is still happening. If i turn the sprinklers on manually from the yard it comes out just fine with lots of pressure. Any more thoughts?
Thanks for the help!

Saturday, June 16th 2012, 6:34pm

by mrfixit

It sounds like they're wired together. Seperate them in to zone 1 and zone 2.

Saturday, June 16th 2012, 5:36pm

by Chsherlock (Guest)

Rain Jet Zone Problem

I recently moved into a home with an existing Rain Jet RC-206P system for the front yard. There are two valve sources for two halves of the yard. Whoever set this up the first time has both sections running at the same time and one half of the yard is getting zero pressure. The system seems to be treating it as one big zone and I cannot figure how to break them apart to run the two halves at different times. I've looking through the manual with no real indication of how to break up the two valves. Any help you can provide is appreciated.