You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 927 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, June 3rd 2012, 7:47pm

by martipe1 (Guest)

thanks

Friday, June 1st 2012, 3:15pm

by GatorGuy

From Hunter's website http://www.hunterindustries.com/support/there-minimum-distance-pump-start-relay-must-be-irrigation-controller

"While most of the time the distance between the controller and pump
start relay doesn't create any problems, every once in a while the wires
on the 24V coil can allow electromagnetic noise to travel back to the
controller. This noise is made when the contacts on the pump start relay
make and break the connection.

It's recommended to use a minimum
distance of 15ft (4.5m) separation between the controller and the relay,
to help dampen any electromagnetic noise.

In addition to this
recommendation, Hunter also recommends all controllers be mounted 15ft
(4.5m) away from pumps and high voltage devices."

Friday, June 1st 2012, 1:30pm

by martipe1 (Guest)

How close can I install the pump start relay to the controller?

I'm going to install a pump start relay, I was wondering if it is right to have it next to the timer, or it can have a negative effect on the controller.

Thanks