You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2369 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, May 26th 2012, 12:05pm

by Wet_Boots

You do not adjust a fixed set point on any rotor. Start over with a new head, and give yourself some wiggle room to further tighten it, to get the left reversal point 'just right' - if the connection is to a PVC nipple, you might add some teflon tape to the threads before installing the head.

Saturday, May 26th 2012, 8:56am

by IndyJ (Guest)

RainBird 5000 fixed left adjustment issue

Trying to adjust fixed left position on a RB5000, found it very difficult to rotate left, got a couple of hard clicks when attempting. Rotor now rotates 360 to the right with no effect from the arc adjustment screw. Did I likely break the rotor?

What is the best way to adjust fixed left on these? RB PDF manual is not very helpful for this...

Thanks for any assistance!