You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 944 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, April 25th 2012, 3:22pm

by GatorGuy

If it is just the handle section and if you can remove it successfully it can be replaced.
Might have a problem finding the parts.

On old units like this there are times when the labor involved in replacing a part, along with finding the part to start with, can make replacing the whole unit worthwhile.

It all depends on how it's assembled and how well the fittings have aged.

You should have the unit tested afterwards.

Wednesday, April 25th 2012, 2:36pm

by golemchamp

Febco 765 3/4"

Hi Everyone,

I'm new here and i would appreciate any help given.
This is my very first time starting up my sprinkler system. Was very
suprised to see that i had sprinklers around my yard. Here's the
problem. After i turned on the water valve for water to go to the
sprinkers, i noticed that there is water leaking from my Febco 765 Unit.
It appears that the PBV? the top part of the unit is probably
cracked/damaged. No problem i youtubed videos and it showed me how to
replace it, but another issue is, i have a tiny crack on the unit
itself. Is there anyway i can repair this crack or buy a small part to
fix it? Or will i have to buy a brand new unit and have a professional
install it? Here is a picture of the crack:

[attach]68[/attach]

Hopefully it is visible enough. This handle is the buttom handle of the whole unit. 1 handle on the top left and this one is the handle on the mid bottom. Thanks for the help!