You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Today, 3:05pm

by mrfixit

The seat washer is the part of the diaphragm that presses against the seat. It should be obvious which part that is once you look at the diaphragm.

I don't know what model valve you have. My first impression from what you stated is the diaphragm came apart. Certain model valves the seat washer will break off. I'm only speculating with the information given.

Yes repairing the main line going to the valves could be the issue. There might be debris inside the valve now. Take the valve apart and see.

Today, 12:00pm

by Dobbs (Guest)

the seat washer?

what is the seat washer? I was just looking at the diaphragm in the below link and can't locate the seat washer.

http://www.sprinklerwarehouse.com/replace-valve-diaphragm-s/8274.htm

Today, 11:54am

by Dobbs (Guest)

Thanks

Thanks for responding.

This zone and control valve are in the front yard and valve is in its own box. It was working just fine about a week ago and the only thing that I have done to the system was some repairs to the zones in the back yard. I had to replace two solenoids on zones in the back yard (control valves are in the back yard as well) and fix a cracked pipe (also in the back yard).





just wanted to mention the above in case it could have impacted anything. I will look to take the c
ontrol valve and see if the
seat washer has broken off.



Today, 6:29am

by mrfixit

Dobbs it sounds like the diaphragm came apart.
Take the valve apart and see if the seat washer is broke off.

Could be a broken pipe.

Could be the flow control is closed.

If poly pipe is involved it could be pinched off.

Yesterday, 8:28pm

by Dobbs (Guest)

Same problem but 1 diffrence

I have the same problem but when I unscrew the bleed valve I still get really low pressure. Any idea what this means?

Monday, April 30th 2012, 11:02am

by GatorGuy

Easier than you think.
Take a quick look HERE for a sample illustration of parts.

Monday, April 30th 2012, 8:23am

by wsommariva

Simple. Unscrew the top and replace.

Monday, April 30th 2012, 8:00am

by Blue520

I'm not really sure where the diaphragm would go. Is this something relatively simple to do, or should I hire a contractor?

Sunday, April 29th 2012, 9:04pm

by mrfixit

Install a new diaphragm.

Sunday, April 29th 2012, 3:31pm

by Blue520

Okay here is what I found out over the weekend. I found the valve for the effected zone and when I turn it on manually there is plenty of pressure for that zone. Does this mean I just need to replace the solenoid valve for this zone? For whatever reason it appears that when I use the controller to control that valve it doesn't open all the way becuase the pressure is very low.
Thanks everyone for their help.