You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4702 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, December 16th 2001, 7:09pm

by SprinklerWarehouse Irriga

Karen,

Place the drain valve in the piping after the control valve. Face the drain valve down. In other words, locate the lowest spot on the piping of a zone or section after the control valve for that section. At the lowest spot insert a tee or elbow (which ever is needed) and face the 1/2" female pipe threads of the tee or elbow in the downward position. Screw the drain valve in place (facing downward). It is always better to dig a deep hole below the drain valve and fill it with pebbles to allow the water to drain away from the drain valve. The drain valve is designed to drain the piping after the valve once the valve for that section or zone is turned off.

I hope This answers your question...if not keep on replying until we answer all your questions! <img src=icon_smile.gif border=0 align=middle>

Thanks from SprinklerWarehouse.com





Edited by - SprinklerWarehouse Irrigator on Dec 17 2001 01:10:23 AM

Edited by - SprinklerWarehouse Irrigator on Dec 18 2001 12:13:00 AM

Sunday, December 16th 2001, 7:01pm

by Karen

How do you install a drain valve?

I need instruction on where and how to install the 16a-fdv drain valve. <img src=icon_smile_question.gif border=0 align=middle>
Thank You

Edited by - Karen on Dec 17 2001 01:04:24 AM