You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 753 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, March 26th 2012, 7:42am

by GatorGuy

Piper,
The manifold being 1" doesn't matter. Feel free to use.

As far as using 1" valves coming out, it's your call. Often you will use one size larger pipes and manifolds to reduce pressure loss through the system. You may gain a couple of psi using a 1" valve.

The manifolds sure make life easier. Big time saver.

Saturday, March 24th 2012, 7:04pm

by piper (Guest)

3/4" vs. 1" valves

I installed (and have been running and maintaining) 15 irrigation zones for lawns, garden and fruit trees 20 years ago. All basically 3/4 PVC through 3/4" valves. I am adding 12 zones (two 6 valve manifolds) for new raised beds in the garden and a small vineyard. The main water supply line coming from the house is 3/4" PVC @ about 50 PSI. In the past I have built (and rebuilt) just gluing everything together at the bottom of the manifold. I just came across your "Dura-Valve-Manifold-Quad-Port" which looks like it would take some of the tedium out of building them. However, from what I can tell these only come in the 1" size. My questions:

1) Does it matter if the manifold plumbing is 1" being fed by my existing 3/4" supply?

2) If going into a 1" manifold doesn't matter should I go ahead and use 1" valves or put a reducer on top and use a 3/4" valve?