You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 947 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, March 22nd 2012, 12:43pm

by mrfixit

I'd like to make one suggestion. Unplug the controller before fiddling with anything inside.

Thursday, March 22nd 2012, 12:21pm

by GatorGuy

Definitely not hard. You can look HERE and HERE for some general guidelines. You have a number of zone wires and one common. When you disconnect your old controller wires mark each one by the zone 1, 2, etc they come from. This is only for your convenience. They can be assigned to any zone but you probably already know each zone by the numbers. Really all you do is disconnect wires, remove old box, install new, reconnect wires and program.

The new digitals offer a number of features you don't have. You have a 12 zone controller. If you stay in the Rainbird line you can go with the ESP line with 3 expansion modules, assuming it's mounted indoors. Or you can go with the Hunter Pro-C line. Or any of a bunch.

Figure maybe 30 minutes tops for the switch out.

Thursday, March 22nd 2012, 12:12pm

by Wet_Boots

Not difficult - just mark every wire at the controller before you do anything

Thursday, March 22nd 2012, 10:53am

by SVKTVKVVK

Replacing Old Rainbird RC-1260Bi with new

Hey All,

I want to replace my old controler with a new one.....is this possible and how hard? ?(