You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2571 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, November 7th 2011, 7:57am

by Wet_Boots

Older SRC controllers needed a backup battery to retain programming - maybe old Pro-C controllers are the same - in any event, keep a fresh backup battery installed in the controller, and don't unplug it in the winter

Sunday, November 6th 2011, 8:46pm

by mrfixit

I don't know how old your controller is but Hunter claims all their controllers have a non-volatile memory. Which means the controller retains the programming forever even without power. I'm not even sure when Hunter incorporated this feature.

Try taking out the back up battery and unplug the controller for a couple of minutes. See if that resets your programming back to where it was.

Sunday, November 6th 2011, 7:46pm

by RC (Guest)

Program settings lost after power failure

I have a Pro-c controller. After a power failure the progrmed settings go crazy and must reprogram.
Is there any fix for this? I would like for it to resume with out having to reprogram run times.