You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5325 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, October 25th 2003, 3:04pm

by Rays Sprinklers

There may be a tiny hole in the diaphram or it may be worn out. You also might have a rock in the valve holding it open. Unscrew the valve and flush it. If it still occurs replace it with an Irritrol 2400 valve (same as the old Hardies) found at sprinkler warehouse. You only have to unscrew and take out the old guts and replace with the new iRritrol.

Saturday, October 25th 2003, 11:00am

by duffmoor

Leaking Valves

I have a 2 zone system with Hardie 1" valves. Both had begun to leak and I replaced the diaphram assemblies on both. Still leak.
The leak is at the drippers and sprinkler heads on the other zone.
Both of these have a continious slow flow coming out of them.
Any ideas???