You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3932 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Saturday, November 15th 2003, 12:48pm

by Rays Sprinklers

[:D]

Saturday, November 15th 2003, 11:25am

by DIYer


Is your main line 1 1/4"? If so, it may be worth installing a 1 1/4" PVB. and replacing your main line with 1 1/4" PVC if its currently 1". You can buy a 1 1/4" PVB here at Sprinklerwarehouse. They have a 30 day no questions asked return policy.

You will loose pressure with distance and every 90 degree turn.

My inside plumbing and well is 1 1/4" and 1.5hp. The pipe from my house to the PVB is 1 1/4" my Febco PVB is 1 1/4" and my main line (schedule 40 PVC) is 1 1/4" to the valve box (~ 50' - 75' from PVB). I have eight zones all well over 100' (fartherst ~200') using 1" poly throughout. I average 55 PSI for about 10 - 15 minutes before my pump cycles (at 60 PSI).

My pressure has been great! In fact, I had to increase the nozzle size on my I20 heads and wire my "8 head" zones toghether resulting in 16 heads per zone (totaling 8 zones).

Tuesday, November 4th 2003, 5:39am

by Rays Sprinklers

Umm....i cant believe that much will come out....mb 5 more PSI or 1 more GPM of course you'll get something but not enough for a major breakthrough....you might have to split the sprinkler zone if you dont have enough pressure to run it. Is this the only zone that does this?

Monday, November 3rd 2003, 4:12pm

by Joseph L. Swinehart

I do agree with telescoping and I think they did that.

My main question is how much will I gain by increasing the backflow up too 1 1/4" from 1"?

The pipe is 1 1/4" coming out the 1" backflow but I need all the pressure I can get.

Thanks.

Monday, November 3rd 2003, 7:09am

by bhungue2

You definitely need to telescope

Saturday, November 1st 2003, 10:05am

by Rays Sprinklers

Okay when you have a run oer 100 feet you need to telescope. You have to start with a 11/4" or 1" pipe at the valve and every 50 feet knock down the size (up to 3/4" as the smallest) what size pipe do you have now in the ground? You need to start big and end small at the last head for that distance. That way you have enough water and pressure for the last head. Did you put this in?

Friday, October 31st 2003, 3:16pm

by Joseph L. Swinehart

Thanks for the respone.

My problem is that the valves and last sprays are a great distance apart.

The line coming out is 1 1/4 and the valves are 1" but the valve is 85' from the back flow and the zone is over 150 to last spray which does not have enough to push it up.

The line is in very , very heavy roots so checking and maybe down sizing pipe is not very cost and time effective.

That is why I was thinking if I just added more pressure even a little by upsizing to a 1 1/4" backflow.

Any helpful hints or charts would be helpful

Joe S.

Friday, October 31st 2003, 12:15pm

by Rays Sprinklers

yeah your pretty safe going with a 1". They are most common and not much differnet from the larger.

Monday, October 27th 2003, 12:09pm

by Joseph L. Swinehart

I think a febco or wilkens. A 600-1 model

Monday, October 27th 2003, 6:20am

by bhungue2

I don't think that the 1' would restrict that much, when water is restricted for such a short distance it doesn't lose that much pressure. I'd stick with the one inch. But if you want wait for a second opinion.