You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1071 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 8 posts

Wednesday, September 14th 2011, 9:21am

by Wet_Boots

Do not bypass the PVB - the water supply is more important than your lawn. Make dead certain that there are no partially-closed valves upstream of the system.

Tuesday, September 13th 2011, 10:49pm

by M2inOR (Guest)

Stumped by PVB problem

I have a system that has been working fine for many years. 7 branches, huge yard. Problem free until recently.

When I turned on my system this year, I had problems with 2 branches of my system, where when either was turned on, the PVB opened after the branch filled and stayed open. It actually oscillated, causing water hammer throughout the house. If I manually turned the water on gradually using the shutoff valve before or after the PVB, I could avoid the oscillation and perhaps only have a slight burp.

System ran flawlessly for years.

My first thought was a defective PVB, so I replaced it with another Toro 53300 PVB. Easy to swap out, but the problem remained.

The branches with the problem have 4 or 6 Hunter rotating lawn sprinkler heads. They function OK.

So...

What might the problem be?
- have plenty of pressure
- all lines are 1" schedule 40
- all valves are working as expected
- no leaks that I can tell

After reading up on things, I see that some heads are now available with check valves at the sprinkler. Could it be that the lines are draining, sucking in air at the sprinkler heads and I am experiencing a type of water hammer due to water in the branches?

Any ideas before I bypass the PVB temporarily to see if there are other issues in the system?

Thanks in advance.

Mike


Mike

Thursday, August 25th 2011, 3:36pm

by Wet_Boots

If you have enough pressure to run the sprinklers, then you just live with the PVB burping water

Thursday, August 25th 2011, 12:32pm

by outdoorjunkie

Wet_Boots,

Thanks for the reply. This is a new install and at most it has about 5 month... I did went to my neighbors who had hess professionally installed and it does the same thing. I talk to the builder in our neighborhood and he said that we have major pressure issues in our area.... That pressure was all ways lower than average...

Your thoughts?

Friday, August 12th 2011, 6:33pm

by Wet_Boots

Something might be causing more of a pressure drop than usual, if this has not been seen in past years. Partially-closed valves upstream of a PVB, for instance.

Friday, August 12th 2011, 2:59pm

by outdoorjunkie

That rush of water is actually the PVB DOING its job.
Ah! Thank you very much for the reply. So nothing to worry about :)

Again Thanks for the info.

Friday, August 12th 2011, 2:51pm

by Central Irrigation

That rush of water is actually the PVB DOING its job.



When your sprinkler system turns on, it is demanding almost all the water your house can supply. This sudden drop in house water pressure actually will try to siphon water out of your garden hose. The PVB is in place to prevent any water from being siphoned back into the house. It does that by purging the water that is trying to re-enter the house.



Another scenario, is that your garden hose is at a higher elevation than the PVB.



Either case, your PVB is working properly.

Friday, August 12th 2011, 12:28pm

by outdoorjunkie

PVB not working?

Hello All,

For a few days I have notice that if I have my water house in the back yard (only in the back yard) is turned on but closed at the hose side at the same time my sprinklers turns on it creates sort of a quick vacuum pressure making the spicket blow out water momentary (only a few secs) is this normal or is my PVB not doing its job?

TIA!