You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1145 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, August 12th 2011, 8:01am

by ReddHead

If you keep your funny pipe short enough you shouldn't need to really worry about the pressure drop you would get from it. Concentrate on keeping your main line and laterals the correct size for your pressure and flow rate.

Friday, August 12th 2011, 7:51am

by Central Irrigation

At 3 GPM you will lose .4 PSI per foot

At 4 GPM you will lose .8 PSI per foot



Taken from Irritrol's website.

Friday, August 12th 2011, 12:36am

by Mitchgo

Keep your 1" pipe and then branch off with funny pipe to the head. Try not to do more then 18" of funny pipe but it's not the end of the world if you do a bit more.

Thursday, August 11th 2011, 9:55pm

by T93

Funny Pipe Flow Rate

Our city has untreated water for irrigation systems, but I only have 48 psi at the best, and 40 psi when a lot of folks are watering. Naturally I plan on setting my timer outside of the heaviest usage time.

Using 1" sch-40 PVC, I can get 13 gpm, but I can't find anywhere what flow rate you get at 40 and 50 psi through a foot of 3/8" ID funny pipe with their 3/4" L-connectors on each end. I'm just looking for a ball-park figure. Hopefully 3-4 gpm.

Orbit is a local company and their design gives me two zones for my approx 40' x 40' front yard. One with a Voyager II head in each front corner, and the other zone with three Voyager II heads along the front of our house and drive due to the 4'x12' walkway from our driveway along the side of the attached garage leading to our front door.

If you have the answer, or first hand experience with this kind of low pressure, please share your knowledge.

tia :S