You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 994 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, July 28th 2011, 9:22pm

by Wet_Boots

They do match, but the real reason to look for the 205TF is that the top cover is an exact replacement for the cover on the R711A

Thursday, July 28th 2011, 8:51pm

by AFM

711A Richdel 3/4" 24 VAC valve rebuild

I have 2 model 711A Richdel 3/4" 24 VAC valves which are not working properly - looks like the solenoids are both bad. On a forum I read that the Irritrol 205TF valve uses the same valve internals as the Richdel 711A. I was wondering if you might be able to verify that. The Richdel is an angle valve and the Irritrol is a straight pattern. I was considering purchasing 2 of the Irritrol valves and then using the bolt on top plate with solonoid valves to replace the top end of the Richdels.