You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2676 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, July 18th 2011, 7:18pm

by servicetechMA

yup, try putting the zone wire from say zone 5 into zone 6 in the clock,probably not the problem,most likely just a solenoid,hopfully not a cut wire though.
if you get an autoranging multimeter this will tell you everything you could ever need to know 99% of the time,wheather its the clock not getting voltage,not sending voltage,partial wire connection,open line or cut wire,bad solenoid. pretty much everything.

Monday, July 11th 2011, 7:30pm

by Wet_Boots

Broken wire or failed valve.

Monday, July 11th 2011, 7:06pm

by luv2bean

1 station not watering on Hunter ICC

Have Hunter ICC 8 station system and 1 station is not coming on at all. Not when system is ran or when individual station is ran either. Any ideals?