You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1172 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, July 8th 2011, 7:13pm

by servicetechMA

pro c

try holding down the prg - and right arrow,then hit reset on back of faceplate,continue holding the three buttons until 12 am is displayed on screen. this might fix it,this periodically happens. not saying this will fix it,but it could,if it doesnt you need to get a competent service tech out there lol, but not before you do what mitchgo says,that needs to be done to find the problem. do any zones work manually from clock.

Monday, July 4th 2011, 6:01pm

by Mitchgo

Reset the controller

Ohm resistance to each valve and voltage readings need to be taken from a multimeter to be able to diagnose the issue

Monday, July 4th 2011, 3:47pm

by carverrocksred

Hunter Pro-C Err

Our Hunter Pro-C system was running fine for weeks and one day it didn't run at it's normal program. I went to check the controller and it read, "5 Err". Tried running single stations manually and each station came back with "1 Err", "2 Err", etc. Called Hunter...they thought it was the cellinoid. So I bypassed zone 5's cellinoid and no luck. Called the people who installed our system and a guy came out and didn't have a clue either. Anyone experienced this error message?