You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2700 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, June 30th 2011, 1:41am

by mike1059

replacing controller

I would recommend going with rain bird or hunter controllers as they will give you more programing options.

Wednesday, June 29th 2011, 4:15pm

by Wet_Boots

Any good modern 6-zone controller will suffice. Do yourself a gigantic favor, and mark each wire, before you start in removing them from the old controller.

Wednesday, June 29th 2011, 1:38pm

by glenntoroel6+

Changing out old Toro Controller

I presently have an old Toro EL-6+ Controller. It no longer functions properly in automatic mode (the day and hour dials no longer turn). It functions fine manually and all 6 stations work when I use it manually.
Ineed to replace it since I am going on vacation. Can I just purchase a current Toro controller and transfer the wires from the old unit to the new one? Will this work if I program the new Toro controller after I transfer the wiring?