You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5385 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, September 19th 2003, 5:18pm

by Rays Sprinklers

okay hardie valves are now the Irritrol 2400T and after 1 0 years they need to be replaces. Replace it with a 2044T. Unscrew out the old insides and replace with the new....its that simple...and can be ordered on line at sprinkler warehouse at an awesome price!

Friday, September 19th 2003, 2:13pm

by byronson

It is a Hardie 1" valve. Sorry but I don't know any more specifics.

Friday, September 19th 2003, 1:06pm

by Rays Sprinklers

what kind of valve is might have to replace the valve if that is whats happening. Let me know!

Friday, September 19th 2003, 8:44am

by byronson

Sprinkler pressure is low and pipes are "thumping"

4 of 5 zones are working perfectly. When zone 5 is turned on there is a "thumping" sound in the pipes, low pressure out of the rotory sprinkler heads, and the main water supply pipe shakes (it is above ground with a manual shut off valve in-line). I took the bleeder valve completely out of the valve and the thumping stopped and the pressure came back. When the bleeder valve is back in the thumping starts again and the pressure decreases. Any ideas?